Configuration Guide (Supporting R05.6.00) Manual

170 Multi-Service IronWare QoS and Traffic Management Configuration Guide

53-1003037-02

clear tm buffer-pool-stats slot

Clears the maximum buffer utilization from the TM.

Syntax clear tm buffer-pool-stats slot slot number

Parameters slot number The slot number specifies the decimal value of the slot from the traffic

manager.

Command

Modes

Privileged EXEC mode

Usage

Guidelines

The clear tm buffer-pool-stats slot command clears the maximum buffer utilization from the TM.

NOTES: When you clear the maximum queue depth statistics, you need to wait for the following

amount of time to read and update the max-queue-depth value again:

• 180 seconds for the BR-MLX-10Gx8-X, NI-MLX-10Gx8-M, NI-MLX-10Gx8-D, BR-MLX-100Gx2-X,

and 4X40 modules.

• Above 180 seconds for the 10Gx24-DM module.

Command

Output

The clear tm buffer-pool-stats slot command clears the following information:

Examples The following example clears maximum buffer utilization:

Brocade#clear tm buffer-pool-stats slot

History

Commands

show tm buffer-pool-stats slot slot number

Output field Description

Maximum Buffer Size Specifies the maximum buffer size in bytes for both gold and bronze traffic and also

shows percentage of buffer used out of maximum packet buffer.

Maximum Occupied

Buffer Descriptors

Specifies the maximum buffer pointers used for both gold and bronze traffic and also

shows percentage of buffer pointers used out of total buffer points.

Release Command History

Multi-Service IronWare

R05.5c

This command was introduced.