Configuration Guide (Supporting R05.6.00)

598 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
clear ip bgp vpnv6 neighbor
clear ip bgp vpnv6 neighbor
Clears the information specific to BGP VPNv6 neighbors
Syntax clear ip bgp vpnv6 neighbor { as-number { soft | soft-outbound } | ip-address { soft |
soft-outbound } | all { soft | soft-outbound }}
Command
Default
None
Parameters as-number neighbors with the AS number
ip-address Neighbor IP address
all Clears all BGP neighbors
soft Soft reconfiguration
soft-outbound Soft reconfiguration outbound update, and send only updated routes
Command
Modes
Global configuration mode
Usage
Guidelines
Use the clear ip bgp vpnv6 neighbor command to clear information specific to BGP VPNv6
neighbors.
NOTE
The clear ip bgp vpnv6 neighbor command does not support damped-path and flap-statistics
options for VPNv4 and VPNv6 address families.
Examples The following example explains how to clear BGP VPNV6 neighbor information.
Brocade(config-bgp)#clear ip bgp vpnv6
Related
Commands
address-family vpnv6
neighbor ipv4-address remote-as as-number activate
neighbor capability orf
Release Command History
Multi-Service IronWare R05.5.00 This command was introduced.