Configuration Guide (Supporting R05.6.00)

Multi-Service IronWare Routing Configuration Guide 623
53-1003033-02
show ipv6 bgp vrf peer-group
show ipv6 bgp vrf peer-group
Displays BGP4+ peer-group information for a specified VRF6
Syntax show ipv6 bgp vrf vrf-name peer-group
Parameters vrf-name Specifies the VRF6 name whose peer-group information needs to be
displayed.
Command
Modes
Privileged EXEC mode
Usage
Guidelines
The show ipv6 bgp vrf peer-group command displays details about the BGP4+ VRF6’s peer-group.
Command
Output
The show ipv6 bgp vrf peer-group command displays the following information:
Examples The following example displays BGP4+ peer group information:
Brocade(config-bgp-ipv6u-vrf)#show ipv6 bgp vrf 2 peer-group pg1
1 BGP peer-group is pg1, Remote AS: 200
Address family : IPV4 Unicast
no activate
DefaultOriginate: yes
Address family : IPV4 Multicast
no activate
Address family : IPV6 Unicast
activate
Address family : IPV6 Multicast
no activate
Address family : VPNV4 Unicast
no activate
Address family : VPNV6 Unicast
no activate
Address family : L2VPN VPLS
no activate
Members:
IP Address: 2::2
IP Address: 11::2, AS: 300
History
Related
Commands
show ipv6 bgp vrf neighbors
Output field Description
Remote AS Specifies the AS in which the remote neighbor resides.
Address family The IP address family type. FOr example: IPV4 Unicast, or VPNV4 Unicast, or L2VPN
VPLS.
DefaultOriginate Whether this option is enabled for the neighbor.
IP Address Peer group IP address.
Release Command History
Multi-Service IronWare R05.5.00 This command was introduced.