Service IronWare Administration Guide (Supporting R05.6.00) User Manual

Multi-Service IronWare Administration Guide 127
53-1003028-02
show cpu histogram
5
show cpu histogram
Displays task CPU usage information.
Syntax show cpu histogram { hold | wait | interrupt | timer }
[ taskname name | above threshold-value| noclear ]
Parameters hold Specifies the display of task hold time information.
wait Specifies the display of task wait time information.
interrupt Specifies the display of task user-interrupt usage information.
timer Specifies the display of task sys-timer time usage information.
taskname name Specifies the display of histogram information for a specific task.
above threshold-value
Specifies the display of histogram information for tasks whose maximum hold
time is above the specified value.
noclear Specifies that histogram data should not be cleared after display. By default,
information is cleared on read.
Command
Modes
User EXEC mode
Privileged EXEC mode
Global configuration mode
Usage
Guidelines
Command
Output
The show cpu histogram command displays the following information:
Output field Description
No of bucket
Bucket Granularity
Last Cleared at
Total No. of task
Task Name
Bkt Num
Bkt Time (ms)
No of Time
HoldTime Total(s)
HoldTime Max (ms)
IntrptTime Total(s)
IntrptTime Max (ms)
TimerTime Total(s)
TimerTime Max (ms)