Service IronWare Administration Guide (Supporting R05.6.00) User Manual

136 Multi-Service IronWare Administration Guide
53-1003028-02
sysmon port port-crc-test
5
sysmon port port-crc-test
Enables the port CRC error monitoring test. The no form of this command disables the port CRC
error monitoring test.
Syntax sysmon port port-crc-test
no sysmon port port-crc-test
Command
Default
The port CRC error monitoring test is enabled by default.
Parameters None.
Command
Modes
Global configuration mode
Usage
Guidelines
Examples The following example disables the port CRC error monitoring test.
Brocade(config)# no sysmon port port-crc-test
History
Related
Commands
sysmon port port-crc-test action
sysmon port port-crc-test counter
sysmon port port-crc-test log-backoff
sysmon port port-crc-test polling-period
sysmon port port-crc-test threshold
Release Command History
Multi-Service IronWare R05.5.00 This command was introduced