Service IronWare Administration Guide (Supporting R05.6.00) User Manual

138 Multi-Service IronWare Administration Guide
53-1003028-02
sysmon port port-crc-test counter
5
sysmon port port-crc-test counter
Configures the port CRC error count limit for the configured polling period for the port CRC error
monitoring test.
Syntax sysmon port port-crc-test counter port-crc-counter less-than crc-count
Command
Default
Parameters crc-count Specifies the port CRC error count limit for the configured polling period. The
range of values is 0 through 65535. The default value is 20.
Command
Modes
Global configuration mode.
Usage
Guidelines
Examples The following example configures the port CRC error counter limit to 20.
Brocade(config)# sysmon port port-crc-test counter port-crc-counter less-than 20
History
Related
Commands
sysmon port port-crc-test
Release Command History
Multi-Service IronWare R05.5.00 This command was introduced