Service IronWare Administration Guide (Supporting R05.6.00) User Manual

Multi-Service IronWare Administration Guide 239
53-1003028-02
Frame Loss Measurement
6
Starting LMM Sessions
Start the responder before starting the initiator.
CE-2 Configuration
BrocadeCE-2(config)# cfm
BrocadeCE-2(config-cfm)# loss-measurement lmm responder 1
BrocadeCE-2(config-cfm-loss-measurement-lmm-responder-1)#start now
CE-1 Configuration
BrocadeCE-1(config)# cfm
BrocadeCE-1(config-cfm)# loss-measurement lmm initiator 1
BrocadeCE-1(config-cfm-loss-measurement-lmm-initiator-1)#start now
Stopping LMM Sessions
Stop the initiator before stopping the responder.
CE-1 Configuration
BrocadeCE-1(config)# cfm
BrocadeCE-1(config-cfm)# loss-measurement lmm initiator 1
BrocadeCE-1(config-cfm-loss-measurement-lmm-initiator-1)#stop now
CE-2 Configuration
BrocadeCE-2(config-cfm)# loss-measurement lmm responder 1
BrocadeCE-2(config-cfm-loss-measurement-lmm-responder-1)#stop now
Clearing history statistics per session
BrocadeCE-1(config-cfm)# loss-measurement lmm initiator 1
BrocadeCE-1(config-cfm-loss-measurement-lmm-initiator-1)#clear-stat
Clearing history statistics globally
BrocadeCE-1(config-cfm)# loss-measurement clear-stat
Syslog messages
Syslogs will be raised for the following cases:
• When the LMM session is started.
• When the LMM session is stopped.
• When the Average Frame Loss Ratio is greater than the Threshold Average Frame Loss Ratio.
• When the Maximum Frame Loss Ratio is greater than the Threshold Maximum Frame Loss
Ratio.
Syslog message display output
The following are the Syslog message outputs displayed for various cases:
When the LMM session started