Service IronWare Administration Guide (Supporting R05.6.00) User Manual

Multi-Service IronWare Administration Guide 305
53-1003028-02
CAM partition profiles
9
The l2-metro parameter adjusts the CAM partitions, as described in Table 47 for Brocade NetIron
XMR and Table 48 for Brocade MLX series routers, to optimize the device for Layer 2 Metro
applications.
The l2-metro-2 parameter provides another alternative to l2-metro to optimize the device for Layer
2 Metro applications. It adjusts the CAM partitions, as described in Table 47 for Brocade NetIron
XMR and Table 48 for Brocade MLX series routers.
The mpls-l3vpn parameter adjusts the CAM partitions, as described in Table 47 for Brocade
NetIron XMR and Table 48 for Brocade MLX series routers, to optimize the device for Layer 3, BGP
or MPLS VPN applications.
The mpls-l3vpn-2 parameter provides another alternative to mpls-l3vpn to optimize the device for
Layer 3, BGP or MPLS VPN applications. It adjusts the CAM partitions, as described in Table 47 for
Brocade NetIron XMR and Table 48 for Brocade MLX series routers.
The mpls-vpls parameter adjusts the CAM partitions, as described in Table 47 for Brocade NetIron
XMR and Table 48 for Brocade MLX series routers, to optimize the device for MPLS VPLS
applications.
The mpls-vpls-2 parameter provides another alternative to mpls-vpls to optimize the device for
MPLS VPLS applications. It adjusts the CAM partitions, as described in Table 47 for Brocade
NetIron XMR and Table 48 for Brocade MLX series routers.
The mpls-vpn-vpls parameter adjusts the CAM partitions, as described in Table 47 for Brocade
NetIron XMR and Table 48 for Brocade MLX series routers, to optimize the device for MPLS Layer-3
and Layer-2 VPN applications.
The multi-service parameter adjusts the CAM partitions, as described in Table 47 for Brocade
NetIron XMR and Table 48 for Brocade MLX series routers, to optimize the device for Multi-Service
applications.
The multi-service-2 parameter provides another alternative to multi-service to optimize the device
for Multi-Service applications. It adjusts the CAM partitions, as described in Table 47 for Brocade
NetIron XMR and Table 48 for Brocade MLX series routers.
NOTE
You must reload your device for this command to take effect.
The multi-service-3 parameter provides another alternative to multi-service to optimize the device
for Multi-Service applications to support IPv6 VRF. It adjusts the CAM partitions, as described in
Table 47 for Brocade NetIron XMR and Table 48 for Brocade MLX series routers.
The multi-service-4 parameter provides another alternative to multi-service to optimize the device
for Multi-Service applications to support IPv6 VRF. It adjusts the CAM partitions, as described in
Table 47 for Brocade NetIron XMR and Table 48 for Brocade MLX series routers.
There are fourteen CAM partitioning profiles for Brocade NetIron XMR and Table 48 for Brocade
MLX series routers.The profiles for Brocade XMR routers are described in Table 47 and the profiles
for Brocade MLX routers are described in Table 48.