Service IronWare Administration Guide (Supporting R05.6.00) User Manual

Multi-Service IronWare Administration Guide 355
53-1003028-02
Syslog messages
A
Notification OSPF virtual intf config error,
rid router-id, intf addr ip-addr,
pkt src addr src-ip-addr,
error type error-type, pkt type pkt-type
Indicates that an OSPF virtual routing
interface configuration error has occurred.
The router-id is the router ID of the device.
The ip-addr is the IP address of the
interface on the device.
The src-ip-addr is the IP address of the
interface from which the device received
the error packet.
The error-type can be one of the following:
• bad version
• area mismatch
• unknown NBMA neighbor
• unknown virtual neighbor
• authentication type mismatch
• authentication failure
• network mask mismatch
• hello interval mismatch
• dead interval mismatch
• option mismatch
• unknown
The packet-type can be one of the following:
• hello
• database description
• link state request
• link state update
• link state ack
• unknown
TABLE 72 Syslog messages OSPF (Continued)
Message level Message Explanation