Service IronWare Administration Guide (Supporting R05.6.00) User Manual

Multi-Service IronWare Administration Guide 377
53-1003028-02
Syslog messages
A
Informational VRF vrf_name has been
configured as management VRF.
Indicates that the specified VRF
has been configured as a
management VRF.
Informational VRF vrf_name has been un-
configured as management VRF.
Indicates that the specified VRF
has been removed as a
management VRF.
TABLE 83 Syslog messages
Message level Message Explanation
Notification Authentication Enabled on portnum The multi-device port authentication feature was
enabled on the on the specified portnum.
Notification Authenticaion Disabled on portnum The multi-device port authentication feature was
disabled on the on the specified portnum.
TABLE 84 Syslog messages BFD
Message level Message Explanation
Notification BFD Session UP for NBR neighbor-ID on
port
The BFD session is UP with the neighbor
specified by the neighbor-ID on the port
specified by the port variable.
Notification BFD Session DOWN for NBR neighbor-ID on
port Reason Neighbor Signaled Session
Down
The BFD session with the neighbor
specified by the neighbor-ID on the port
specified by the port variable is Down
because the BFD neighbor has signaled the
session to be down.
Notification BFD Session DOWN for NBR neighbor-ID on
port Reason Administratively Down
The BFD session with the neighbor
specified by the neighbor-ID on the port
specified by the port variable is Down for
Administrative reasons.
TABLE 85 Syslog messages Optics
Message level Message Explanation
Notification Transceiver type checking has been
disabled!
The transceiver type checking feature has
been disabled. The device will continue to
report incompatible transceivers through
syslog messages and but will not shutdown
a port that contains one.
Notification Session DOWN for LSP lsp-name Reason
Administratively Down
The BFD session for the LSP specified by
the lsp-name is Down for Administrative
reasons.
Notification Session Up for LSP lsp-name The BFD session for the LSP specified by
the lsp-name is Up.
TABLE 82 Syslog messages VRF (Continued)
Message level Message Explanation