Service IronWare Administration Guide (Supporting R05.6.00) User Manual

Multi-Service IronWare Administration Guide 379
53-1003028-02
Syslog messages
A
TABLE 86 Syslog messages LDP
Message level Message Explanation
Notification MPLS LDP path vector limit mismatch for
session lsrId labelSpaceId (value local
vector limit) with peer lsrId labelSpaceId
(value peer vector limit)
This notification is generated when the
value of the LDP path vector limit value
from the peer does not match that of the
entity.
Notification MPLS LDP entity session lsrId labelSpaceId
with peer lsrId labelSpaceId is up
This notification is sent when the value of
'mplsLdpSessionState' enters the
'operational(5)' state.
Notification MPL LDP entity session lsrId labelSpaceId
with peer lsrId labelSpaceId is down
This notification is sent when the value of
'mplsLdpSessionState' leaves the
'operational(5)' state.
TABLE 87 Syslog messages DHCP
Message level Message Explanation
Warning DHCPC: No DHCP service available on the
network.
The DHCPOFFER message is not received
within 16 seconds of starting the DHCP
address configuration phase.
Warning DHCPC: Failed to renew DHCP lease on
port 1/1 with IP address 10.1.1.1 mask
255.255.255.0
The DHCP lease cannot be renewed.
Warning DHCPC: Failed to configure IP address on
port 1/1; with IP address 10.1.1.1,mask
255.255.255.0
The IP address cannot be configured
without a reason.
Warning Failed to download image file image name The image file cannot be downloaded.
Warning DHCPC: Failed to download configuration
file image name
The configuration files cannot be
downloaded.
TABLE 88 Syslog messages DHCPv6
Message level Message Explanation
Warning DHCPv6: Maximum allowed 60000
delegated prefixes learned.
The delegated prefixes’ limit has reached
the maximum value at the system level.
Warning DHCPv6: Write to flash file to save
delegated prefixes information failed.
Saving the delegated prefixes to flash file
failed.
Warning DHCPv6: Maximum allowed 20000
delegated prefixes learned on interface ve
100.
The delegated prefixes’ limit has reached
the maximum value at the interface level.
TABLE 89 Syslog messages NSR
Message level Message Explanation
Notification NSR: Successfully notified RTM6 that
OSPF6 switchover complete
OSPFv3 completes the restart process after
switching over to the new master MP.