Hardware Guide (Supporting R05.6.00) User guide

Brocade NetIron CES 2000 Series and NetIron CER 2000 Series Hardware Installation Guide 63

53-1003029-02

Port specifications

• Total air flow: 267 LFM

• Fan operating noise:

• Based on ISO 7779

• < 60 dB-A

Safety agency approvals

• CAN/CSA-22.2 No.60950-1-07/UL 60950-1-Second Edition

• EN 60825-1 Safety of Laser Products – Part 1: Equipment Classification, Requirements and

User’s Guide

• EN 60825-2 Safety of Laser Products – Part 2: Safety of Optical Fibre Communications

Systems

• CE EN60950-1: 2006

• TUV EN60950-1: 2006

• IEC EN60950-1:2005

Electromagnetic approvals

• FCC Part 15, Subpart B (Class A)

• EN 55022 (CE mark) (Class A)

• CISPR-22 (class A)

• ICES-003 (Canada) (Class A)

• AS/NZ 55022 (Australia) (Class A)

• VCCI (Japan) (Class A)

• EN 61000-3-2

• EN 61000-3-3

• EN 61000-6-3

Port specifications

This section provides pin assignments for the following ports:

• Device’s console port (serial connector)

• Device’s management port (RJ-45 unshielded twisted pair (UTP) connector)

DANGER

The intra-building ports of the equipment or subassembly is suitable for connection to

intra-building or unexposed wiring or cabling only. The intra-building ports of the equipment or

subassembly MUST NOT be metallically connected to interfaces that connect to the OSP or its

wiring. These interfaces are designed for use as intra-building interfaces only (Type 2 or Type 4