User Manual v12.3.0 Owner's manual

Brocade Network Advisor IP User Manual 1267

53-1003153-01

Viewing a configuration policy manager report

NOTE

You must run the configuration policy manager at least once before you can view a report.

To view an existing configuration policy manager report, complete the following steps.

1. Select Monitor > Configuration Policy Manager.

The Configuration Policy Manager dialog box displays.

2. Select the policy for which you want to view a report in the Monitors list.

3. Click Report.

NOTE

If you have run this policy more than once, the latest report displays.

The Policy_Name - Configuration Policy Manager Report displays (Figure 533) in a web

browser.

4. Review the report details:

• Name — Name of the configuration policy manager report.

• Date — Date and time the report was finished.

• Export button — To export a report, refer to “Exporting a configuration policy manager

report” on page 1270.

• E-Mail button — To e-mail a report, refer to “Exporting IP reports to e-mail recipients” on

page 1365.

• Status Summary — Number of checks that passed, partially failed, failed, not applicable,

or unknown.

When a policy status fails or partially fails, the status is highlighted in pink.

• Trigger — Trigger for the report. Valid results include Manual, Event Action, and Scheduled.