User Manual v12.3.0 Owner's manual
Brocade Network Advisor IP User Manual 1373
53-1003153-01
Exporting IP reports to e-mail recipients
41
Nodes Node information includes the following:
• Name — The name of the node. Click the name to launch the Detailed Product
Report.
• IP Address — The IP address of the product.
• Product Type — The type of product.
• Serial Number — The serial number of the product.
• RBridge ID — The RBridge ID number of the product.
• Status — The status of the product.
• Model — The model of the product.
• Firmware — The firmware level of the product.
• Fabric Ports — The number of fabric ports on the product.
• Edge Ports — The number of edge ports on the product.
Admin Status Admin status information includes the following:
• Name — The name of the node. Click the name to launch the Detailed Product
Report.
• Status — Whether the product is in normal operating mode or troubleshooting
mode.
• Status Last Updated — When the last status update occurred.
• Memo — A memo for the product.
• Memo Last Updated — When the last memo update occurred.
Modules Module information shows what modules are installed on the product.
• Unit/Slot Number — For products that support stacking, you can view the unit
number and slot number.
Slot — For products that do not support stacking, you can view the slot number.
• Type — For wireless products, the type shows the model name of the product. For
wired products, the type of module installed in the slot.
• Serial Number — The serial number of the module.
For wired products, the serial number cell may be blank.
• Ports — The number of ports on the product.
The number of ports for ATM modules displays as zero.
• Hardware Revision — The hardware revision.
• Present — Whether the module is still installed on the product.
IP Addresses The IP addresses of each interface, including the virtual routing interface on wired
products. For Layer 2 switches, the management IP address displays in the IP Addresses
table with "management" in the Interface column.
• Port — The port number.
• IP Address — The IP address.
• Subnet Mask — The subnet mask number.
• VRF — The virtual routing interface.
Ethernet Ports This table contains the following information for each Ethernet interface on the product:
• Identifier — The port identifier.
• Port Name — The port name.
• Name — The name of the port.
• MAC Address — The MAC address of the port.
• Type — The type of port.
• Speed (Mbps) — The speed of the port.
• Duplex Mode — The duplex mode of the port.
• Tag Mode — The tag mode of the port.
• Role — The role of the port, for example, Edge.
• Profile Mode — Whether profile mode is enabled or disabled.
• Active Profile — The active profile of the port.
• Attached MAC — The MAC address of the device attached to the port.
TABLE 110 Detailed Cluster Report fields and components (Continued)