User Manual v12.3.0 Owner's manual

1420 Brocade Network Advisor IP User Manual
53-1003153-01
RASLog Events
C
CONF-1031 LOG configDefault completed successfully.
CONF-1032 LOG configRemove completed successfully.
CONF-1042 LOG | AUDIT Indicates that the fabric configuration parameter value has been changed.
CONF-1043 LOG | AUDIT Indicates that the fabric configuration parameter value has been changed.
CONF-1044 LOG | AUDIT Indicates that the fabric configuration parameter value has been changed
by a user.
FABR-1016 LOG FICON mode enabled.
FABR-1017 LOG FICON mode disabled.
FABR-1030 LOG Domain ID changed
FCR-1005 LOG Indicates that a device is removed from the logical storage area network
(LSAN) zone in the edge fabric.
FCR-1006 LOG Indicates that a device is added to a logical storage area network (LSAN)
zone in the edge fabric.
FCR-1007 LOG Indicates that a logical storage area network (LSAN) zone attached to the
specified port was deleted in the edge fabric.
FCR-1008 LOG Indicates that a logical storage area network (LSAN) zone was created at
the specified port in the edge fabric.
FCR-1009 LOG Indicates that a logical storage area network (LSAN) zone was enabled in
the edge fabric attached to the specified port. The enabled LSAN zone
configuration is listed.
FCR-1010 LOG Indicates that a logical storage area network (LSAN) zone is disabled in the
edge fabric attached to the specified port.
FCR-1011 LOG Indicates that a logical storage area network (LSAN) zone update was
received from another domain.
FCR-1015 LOG Indicates that an EX_Port was created on the specified port in the specified
domain.
FCR-1016 LOG Indicates that a fabric is no longer accessible through the backbone fabric.
This may be caused by a link or switch failure.
FCR-1034 LOG LSAN zone added in backbone fabric.
FCR-1035 LOG LSAN zone device <device WWN> added in the backbone fabric.
FCR-1036 LOG LSAN zone <zone name> enabled in the backbone fabric.
FCR-1037 LOG LSAN zone disabled in the backbone fabric.
FCR-1061 LOG Backbone fabric created on a port
FCR-1068 LOG FCR disabled.
FCR-1069 LOG FCR enabled.
FCR-1071 LOG Port is changed from non-FCR port to FCR port.
FCR-1072 LOG Port is changed from FCR port to non-FCR port.
FCR-1088 LOG LSAN <Enforce/Speed> tag <Tag Name> added.
FCR-1089 LOG LSAN <Enforce/Speed> tag <Tag Name> removed.
FCR-1091 LOG Backbone Fabric ID changed to <Tag>.
TABLE 132 Configuration change events (Continued)
Event ID Type Description