User Manual v12.3.0 Owner's manual

Brocade Network Advisor IP User Manual 1445
53-1003153-01
Viewing SAN device properties
E
Viewing SAN device properties
To view the properties for a device, complete the following steps.
1. Right-click any product icon and select Properties.
The Properties dialog box displays, with information related to the selected device (such as
switches, directors, HBAs, trunks, tunnels, and nodes).
To add user-defined property labels, refer to “Adding a property field” on page 1473.
Fields containing a green triangle ( ) in the lower-right corner are editable.
NOTE
Depending on the device type, some of the properties listed in the following table may not be
available for all products.
TABLE 138 Device properties
Field/Component Description
Addressing Mode The addressing mode of the switch.
Back to Edge Routing Whether back to edge routing is supported.
Bandwidth The bandwidth of the FCIP tunnel.
Capability The node capability.
Compression Whether compression is on or off for the FCIP tunnel.
Connected Virtual FCoE Port The fabric name, switch name, and virtual FCoE port number of the
connected virtual FCoE port.
Contact The primary contact at the customer site.
Contributors The device contributors.
Device Type Whether the device is an initiator or target.
Description A description of the customer site.
Destination IP Address The IP address of the of the FCIP tunnel destination device.
Discovery Status The discovery status of the switch. Examples include “Discovered: Seed
Switch” and “Discovered: Not Reachable”.
Domain ID The device’s domain ID, which is the top-level addressing hierarchy of
the domain.
Fabric The fabric name.
Fabric Name The name specified through the device Element Manager.
Fabric Watch Whether Fabric Watch is up or down.
Factory Serial Number The factory serial number.
Fastwrite Whether fastwrite is on or off for the FCIP tunnel.
FC Port The FC port of the FCIP tunnel.
FCoE Capable Whether the device is Fibre Channel over Ethernet capable.
FCS Role Whether FCS is supported.
Routing Policy The routing policy configured on the switch.
Firmware The firmware version.