User Manual v12.3.0 Owner's manual

1450 Brocade Network Advisor IP User Manual
53-1003153-01
Viewing SAN device properties
E
4. Click OK on the Properties dialog box to close the dialog box.
Viewing iSCSI properties
NOTE
Viewing iSCSI properties is available for Fabric OS products.
The iSCSI Properties dialog box displays information related to iSCSI. To view the properties for an
iSCSI device, complete the following steps.
1. Right-click a product icon and select Properties.
The Properties dialog box displays.
2. Select the iSCSI tab.
NOTE
Some fields may not be available for all products.
Type The level or type of RAID storage. Possible values are as follows:
0 — Striped disk array without fault tolerance.
1 — Mirroring and duplexing.
2 — Hamming code ECC.
3 — Parallel transfer with parity.
4 — Independent data disks with shared parity disk.
5 — Independent data disks with distributed parity blocks.
6 — Independent data disks with two independent distributed parity
schemes.
7 — Optimized asynchrony for high I/O rates as well as high data
transfer rates.
10 — Very high reliability combined with high performance.
53 — High I/O rates and data transfer performance.
0+1 — High data transfer performance.
Total (Count) All LUNs, whether assigned or not, that currently exist on this storage
device.
Total (Size GB) The total amount of storage space on the storage device, in gigabytes.
Unique LUN ID Identifies the unique LUN identifier.
Volume State The volume state of the LUN.
Add button Click to add a user-defined property. For more information, refer to
“Adding a property field” on page 1473.
Edit button Click to edit a user-defined property. For more information, refer to
“Editing a property field” on page 1473.
Delete button Click to delete a user-defined property. For more information, refer to
“Deleting a property field” on page 1474.
TABLE 139 Storage Properties (Continued)
Field Description