User Manual v12.3.0 Owner's manual

1460 Brocade Network Advisor IP User Manual
53-1003153-01
IP device properties
E
Delete button Click to delete a user-defined property. For more information, refer to
“Deleting a property field” on page 1474.
Nodes tab Select to display information about nodes in the fabric. For detailed
information about this tab, refer to “Viewing VCS fabric properties” on
page 1462.
Port Profiles tab Select to display information about port profiles for the fabric members.
For detailed information about this tab, refer to “Viewing VCS fabric
properties” on page 1462.
Ports tab Select to display information about ports on the device.
Show list Select the port type you want to display. Options include:
All
Trunked Por ts
ICLs
MCT Ports
Port Count The number of ports in the group.
Port Actions list Select to enable or disable port actions.
Performance list Select to launch the Performance dialog box.
Identifier The identifier of the port.
Name The name of the port.
MAC Address The MAC address of the port.
Port Status The status of the port.
Port State The state of the port.
Type The port type.
Speed The speed of the port.
L2/Tag Mode Whether the port is tagged or untagged.
Untagged VLAN ID The untagged VLAN identifier of the port.
Duplex Mode The duplex mode of the port.
Role The role of the port. Possible values include the following roles:
Fabric
Edge
Stacking
Peri Port
For MCT switches, the port role is either ICL or MCT.
Profile Mode Displays the profile mode status of the port; for example, Enabled or
Disabled.
Active Profiles Displays the active profiles associated with the port.
LAG/Trunk ID Displays the LAG name and the trunk port identifier.
Attached MAC Displays the MAC address of the attached device. The value is empty
when the port is not connected. The value contains a comma-separated
list of MAC address when more than one MAC address is found.
Stacking Port Whether or not the port stacked.
TABLE 142 IP device and port properties (Continued)
Field/Component Description