User Manual v12.3.0 Owner's manual

Brocade Network Advisor IP User Manual 1463
53-1003153-01
IP device properties
E
Contact The name of the person or group you should contact about the product,
for example, Technical Support. This is an editable field.
Description The description of the product.
Connected AP Count The number of AP devices connected to the device.
Add button Click to add a user-defined property. For more information, refer to
Adding a property field” on page 1473.
Edit button Click to edit a user-defined property. For more information, refer to
“Editing a property field” on page 1473.
Delete button Click to delete a user-defined property. For more information, refer to
“Deleting a property field” on page 1474.
Nodes tab Select to display information about nodes on the fabric.
Name The name of the VCS fabric member.
Alias The fabric member alias name.
Host Name The host name associated with the VCS fabric member.
System Name The name of the switch.
IP Address The IP address of the switch.
System OID The system’s object identifier.
Product Type The fabric’s product type, which is a Layer 2 switch.
Serial # The VCS fabric member’s serial number.
VCS Mode The VCS mode of the switch, which can be standalone or VCS fabric.
VCS ID The VCS ID configured in the fabric.
Config Mode The configuration mode of the fabric, which is Local Only or Distributed.
Licensed Features The licensed features available on the device.
RBridge ID The routing bridge identifier associated with the VCS fabric member.
Access Gateway Mode Indicates whether the Access Gateway mode is enabled or disabled.
State The device’s state (online or offline).
Fabric Status The state of the fabric that is least operational, based on ISL status.
The possible states are: operational, unknown, degraded or failed.
Status The health status of the switch.
Admin Status The administrative status of the switch, for example, Normal.
Memo Additional comments regarding the switch.
Vendor The switch vendor.
Model The switch model type (VDX 6710, VDX 6720, or VDX 6730).
Port Count The number of ports on the switch.
Firmware The firmware version and build number.
Location The physical location of the product.
Contact The name of the person or group you should contact about the product,
for example, Technical Support.
TABLE 143 VCS fabric properties (Continued)
Field/Component Description