User Manual v12.3.0 Owner's manual

Brocade Network Advisor IP User Manual 1467
53-1003153-01
IP device properties
E
Port Actions list Select one of the following options:
• Enable
• Disable
• Display Attached Port Properties
Performance list Select to launch the Performance dialog box.
Fabric and Edge Ports properties
• Identifier — The identifier of the port.
• Name — The name of the port. This is an editable field. Enter a
name (up to 64 characters) for the port.
• MAC Address — The MAC address of the port.
• Port Status — The status of the port.
• Port State — The state of the port.
• Type — The port type.
• Speed — The speed of the port.
• L2/Tag Mode — Indicates whether L2 tag mode is enabled or
disabled.
• Untagged VLAN ID — The untagged VLAN identifier of the port.
• Duplex Mode — The duplex mode of the port.
• Role — The role of the port. Possible values include the following
roles:
- Fabric
- Edge
- Stacking
• Profile Mode — Displays the profile mode status of the port; for
example, Enabled or Disabled.
• Active Profiles — Displays the active profiles associated with the
port.
• Port Profile Domains — Displays the port profile domain name.
• Attached Device [MACs] — Displays the MAC address of the
attached device.The value is empty when the port is not connected.
The value contains a comma-separated list of MAC addresses when
more than one MAC address is found.
• LAG/Trunk ID — Displays the LAG or trunk ID.
• Flex Port — Displays the ports that support Ethernet or Fibre
Channel.
TABLE 143 VCS fabric properties (Continued)
Field/Component Description