User Manual v12.3.0 Owner's manual
Brocade Network Advisor IP User Manual 1471
53-1003153-01
Host properties
E
WWN Source The source of the world wide name. Options include:
Fabric — The WWN is assigned from the fabric. The fabric assigned
address must be enabled.
Factory — The WWN is assigned at the factory.
Hyper-V Virtual FC Indicates if the port is a Hyper-V virtual FC port. For non-virtual ports,
the field displays as N/A.
NOTE: This property is applicable only to Windows server’s version
2012 and later. It is a special type of NPIV port that can be
presented directly to VMs in a Hyper-V environment.
Configuration
Configured State Indicates whether the port is enabled or disabled.
Max Bandwidth The maximum allowable bandwidth output for the selected port.
Operating State Indicates whether the port is online or offline.
Configured Speed The configured port speed.
Operating Speed The speed at which the port is operating.
Max Speed Supported The maximum speed that is supported on the port. For the FC port,
the maximum speed is 8 Gbps.
Configured Topology The configured topology setting: auto, point-to-point, or loop.
Operating Topology The operating topology setting: auto, point-to-point, or loop.
Boot over SAN Indicates whether boot over SAN is enabled.
Receive BB Credits The number of buffer credits received.
Transmit BB Credits The number of buffer credits transmitted.
Frame Field Size The frame size, in bytes, of the port.
Hardware Path The hardware path of the HBA.
Virtual Port Count The number of virtual ports associated with the HBA.
FEC State The state of FEC (Forward Error Correction) is an
error recovery mechanism.
BB Credit Recovery The status of Buffer to Buffer Credit Recovery.
Configured BBSCN Count The count of configured buffe state change number.
Negotiated BBSCN Count The count of negotiated buffer state change number.
Operating State Displays details about the state of the following operating
parameters:
• Beacon State
• Link Beacon State
• MPIO Mode State
• Path Time Out
• Logging Level
• Target Rate Limit
• Default Rate Limit
FC-SP
Authentication Indicates whether FC-SP authentication is enabled or disabled.
TABLE 31 Adapter port properties (Continued)
Field Description