User Manual v12.3.0 Owner's manual

1690 Brocade Network Advisor IP User Manual
53-1003153-01
Database tables and fields
I
ESTIMATED_DISTANCE The estimated physical distance of the connection
between ports.
int
ACTUAL_DISTANCE The physical distance of the connection on the port in
relation to the other port.
int
LONG_DISTANCE_SETTING Whether long distance enabled. int
DEGRADED_PORT Denotes if the port is in a degraded state. Has value
as N/A for ports that are not online.
varchar 16
REMOTE_NODE_WWN Node WWN of the attached port. varchar 255
REMOTE_PORT_WWN WWN of the attached port. varchar 255
LICENSED 1 = the port is licensed; otherwise, 0. smallint
SWAPPED 1 = port is swapped; otherwise, 0. smallint
TRUNKED 1 = port is trunked; otherwise, 0. smallint
TRUNK_MASTER 1 = the port is trunk master; otherwise, 0. smallint
PERSISTENT_DISABLE 1 = port is persistently disabled. smallint
FICON_SUPPORTED 1 = FICON is supported; otherwise, 0. smallint
BLOCKED 1 = port is blocked; otherwise, 0. smallint
PROHIBIT_PORT_NUMBERS Indicates the ports prohibited with the current port as
configured in the allow prohibit matric (PDCM).
varchar 1024
PROHIBIT_PORT_COUNT The count of prohibited ports. smallint
NPIV Whether NPIV mode is enabled. smallint
NPIV_CAPABLE Instance NPIV mode capability:
1 = indicates port has NPIV capability
2 = NPIV license is enabled
smallint
NPIV_ENABLED Whether NPIV mode is enabled. smallint
FC_FAST_WRITE_ENABLED 1 = FC fast write is enabled. smallint
ISL_RRDY_ENABLED Denotes if ISL receiver ready is enabled. smallint
RATE_LIMIT_CAPABLE Denotes if the port is capable of Rate Limiting. smallint
RATE_LIMITED Denotes if the port has Rate Limiting Enabled. smallint
QOS_CAPABLE Indicates if the port is QOS capable. smallint
QOS_ENABLED Indicates if the port is QOS enabled. smallint
TUNNEL_CONFIGURED Denotes if the port has a fcip tunnel configured. smallint
FCIP_TUNNEL_UP Denotes if the fcip tunnel that is configured is up. smallint
FCR_FABRIC_ID Stores the FCR fabric ID. Applicable if the port is
configured as an EX port.
smallint
FCR_INTEROP_MODE The interop mode of the FCR fabric. Applicable if the
port is an EX port.
smallint
CALCULATED_STATUS The calculated status of the port. Eg. Healthy, Down,
Marginal etc.
varchar 64
USER_DEFINED_VALUE1 User defined value used for annotation. varchar 256
TABLE 395 SWITCH_PORT (Continued)
Field Definition Format Size