User Manual v12.3.0 Owner's manual

Brocade Network Advisor IP User Manual 177
53-1003153-01
Software Configuration
5
FIGURE 69 Options dialog box (Product Communication pane)
3. To connect using HTTP, complete the following steps.
a. Select the Connect using HTTP option.
b. Enter the connection port number in the Port # field. Continue with step 6.
The default HTTP port number is 80.
NOTE
To manage FIPS-enabled Fabric OS fabrics, you must configure Product Communication using
the Connect using HTTPS (HTTP over SSL) only or HTTPS then HTTP option.
4. To connect using HTTPS (HTTP over SSL), complete the following steps.
a. Select the Connect using HTTPS (HTTP over SSL) only option.
b. Enter the connection port number in the Port # field. Continue with step 6.
The default HTTPS port number is 443.
5. To connect using HTTPS then HTTP, complete the following steps.
a. Select the Connect using HTTPS then HTTP option.
b. Enter the connection port number in the Current Port # field. Continue with step 6.
The default HTTPS port number is 443 and the default HTTP port number is 80.
6. (Fabric OS and Network OS products only) Select IPv4 or IPv6 to set the preferred IP format.
7. Cl ic k Apply or OK to save your work.