User Manual v12.3.0 Owner's manual

308 Brocade Network Advisor IP User Manual
53-1003153-01
Reports
7
Host Adapter with Unsupported and Faulty SFP reports
The Adapters Faulty SFP report lists all Brocade adapters with unsupported or faulty small
form-factor pluggable (SFP) transceivers. This report is only available for Brocade adapters.
For adapters with unsupported SFPs, this report is the same as the Adapters Inventory report
filtered to show only those hosts with adapter ports that have unsupported SFPs. For a complete
list of fields and components of the Adapters Inventory report, refer to the “Host Adapter Inventory
reports” on page 306.
For adapters with degrading SFPs, there are additional columns in the table that show the
SFP/SFP+ and pluggable optical module (POM) properties for the degrading SFP.
Table 28 describes the SFP and POM fields of the Adapters Faulty SFP Report. For general report
content and table functions, refer to “Report content and functions” on page 309.
TABLE 28 Adapters Faulty SFP report fields and components
Field/Component Description
SFP Supported Whether the SFP is supported or not.
Connector Type The type of port connector; for example, LC. SC, or Cu (copper cable).
Transceiver The type of transceiver; for example, SFP or SFP+.
Media The type of media for the transceiver; for example, single mode.
Speed The port speed.
Extended ID The identifier for the extended link.
Encoding Displays how the extended link is encoded, for example, 8B10B.
Baud Rate The transmission rate, roughly equivalent to the number of bits per second.
Length 9U1 The length of the single-mode fiber-optic cable, used in situations where gigabit
performance is not required (for distances greater than 100 meters).
Length 9U2 The length of the single-mode fiber-optic cable, used in situations where gigabit
performance is not required (for distances greater than 100 meters).
Length 50u The length of the 50u fiber-optic cable (for distances greater than 10 meters).
Length 62.5u The length of the 62.5u fiber-optic cable (for distances greater than 10 meters).
Length Cu The length of the copper cable (for distances greater than 1 meter, where optimum
performance is required).
Vendor Name The vendor of the extended link.
Vendor OUI The vendor’s organizational unique identifier (OUI).
Vendor Part The part number of the extended link.
Revision The revision level of the extended link.
Wavelength The wavelength translation, which enables longer reach through lower attenuation.
Options Displays details about the transceiver; for example, the type of port connector, type of
transceiver, and enable/disable status.
BR Max The upper bit rate limit at which the SFP transceiver meets its specifications.
BR Min The lower bit rate limit at which the SFP transceiver meets it specifications.
Serial # The serial number of the SFP transceiver.
Date Code The date the SFP was manufactured transceiver.