User Manual v12.3.0 Owner's manual

350 Brocade Network Advisor IP User Manual
53-1003153-01
Performance monitors
8
• Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
- Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
- Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
- Target — The target port on the connected device. Click to launch the device properties
dialog box.
• CRC Errors/sec — The number (error rate) of cyclic redundancy check (CRC) errors per second
for the duration specified in the monitor.
• CRC Errors — The number (error count) of cyclic redundancy check (CRC) errors for the duration
specified in the monitor.
• Link Failures — The number of link failures.
• Sequence Errors — The number of sequence errors.
• Invalid Transmissions — The number of invalid transmissions.
• C3 Discards Tx TO — The number of transmitted Class 3 frames discarded due to timeout.
• Encode Error Out — The number of encode errors outside of the frame.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.
• State — The port state (for example, Enabled).
• Status — The port status (for example, Up).
• Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to “Editing a preconfigured performance monitor” on page 370.
Accessing additional data from the Top Port CRC Errors monitor
• Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to “Application menus” on
page 1399.
• Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to “Performance Data” on page 1099.