User Manual v12.3.0 Owner's manual

Brocade Network Advisor IP User Manual 353
53-1003153-01
Performance monitors
8
• Encode Error Out/sec — The number (error rate) of encoding errors outside of frames per
second for the duration specified in the monitor.
• Encode Error Out — The number (error count) of encoding errors outside of frames for the
duration specified in the monitor.
• CRC Errors — The number of CRC errors.
• Link Failures — The number of link failures.
• Invalid Transmissions — The number of invalid transmissions.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.
• State — The port state (for example, Enabled).
• Status — The port status (for example, Up).
• Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to “Editing a preconfigured performance monitor” on page 370.
Accessing additional data from the Top Port Encode Out Errors monitor
• Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to “Application menus” on
page 1399.
• Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to “Performance Data” on page 1099.
Top Port Errors monitor
The Top Port Errors monitor (Figure 158) displays the top ports with receive and transmit errors in a
table.
FIGURE 158 Top Port Errors monitor