User Manual v12.3.0 Owner's manual

602 Brocade Network Advisor IP User Manual
53-1003153-01
DCB configuration management
17
DCB configuration management
Depending on the platform, the DCB switch has one of the configurations shown in Table 60.
You must configure DCB interfaces and ports differently than you configure Fibre Channel ports to
effectively use the converged network features.
For example, priority-based flow control (PFC) and Enhanced Transmission Selection (ETS) are the
two QoS policy enhancements you must configure to create a lossless Ethernet. You then use DCBX
protocol on DCB-enabled devices to exchange configuration information.
The DCB ports of FOS DCB devices are categorized into two types:
• External ports - The eight external ports are the same as the original 10 Gbps Ethernet DCB
ports. The default name in the device tree is ExT <slot>/<port>.
• Internal ports - The default name for the 12 or 14 internal ports is InT <slot>/<port>.
802.1x, LAG configuration, and Spanning Tree Protocol (STP) are not supported on internal
ports.
TABLE 60 DCB configurations
Device type Configuration possibilities
IBM blade server • 14 internal 10-Gbps ports for IBM BladeCenter H
(BCH) chassis type
• 12 internal 10-Gbps ports IBM BladeCenter HT
(BCHT) chassis type
• 8 external 10-Gbps DCB ports
• 8 8-Gbps FC ports
Dell embedded switch module
• 16 10-Gbps internal ports
• 8 10-Gbps external ports
• 4 8-Gbps FC ports
Fabric OS DCB switch
• 8 16-Gbps FC ports
• 24 10-Gbps Ethernet ports
Fabric OS FCOE10-24 blade 24 10-Gbps Ethernet ports
Network OS VDX switches
• Network OS VDX 2730 10 Gbps connection blade
• Network OS VDX 6710 switch
• Network OS VDX 6720-24 switch
• Network OS VDX 6720-60 switch
• Network OS VDX 6730-32 switch
• Network OS VDX 6730-76 switch
• Network OS VDX 6740 switch
• Network OS VDX 6740T switch
• Network OS VDX 8770-4 switch
• Network OS VDX 8770-8 switch