User Manual v12.3.0 Owner's manual

604 Brocade Network Advisor IP User Manual

53-1003153-01

DCB configuration

To launch the DCB Configuration dialog box, select Configure > DCB from the menu bar.

The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and

functions.

NOTE

For FOS DCB devices, the Protocol Down Reason column, shown in Figure 240, displays the values

only for the external ports of embedded platforms but not for the internal ports.

FIGURE 240 DCB Configuration dialog box

Minimum DCB configuration for FCoE traffic

You must complete the following procedures to create the basic configuration of DCB for FCoE

traffic.

NOTE

This section is applicable for Fabric OS versions 6.3.0, 6.3.1, 6.3.2, 6.4.1, and 6.4.2. This section is

not applicable for Fabric OS versions 6.3.1_dcb, 6.3.1_cee, 6.4.1_fcoe, and 7.0.x.