User Manual v12.3.0 Owner's manual

650 Brocade Network Advisor IP User Manual

53-1003153-01

Network OS switches in VCS mode

Viewing QoS parameters on the Network OS switch LAG

Table 75 (DCB) and Table 76 (non-DCB) describe the parameters that displays on the View LAG

dialog box - QoS tab.

NOTE

Network OS switches in VCS mode support only the DCB map. Network OS switches in standalone

mode supports both the DCB and Traffic Class maps.

QoS-DCB

Status Indicates whether the LAG is enabled or disabled. You must enable the

LAG to use the DCB functionality.

Default CoS The Cost of Service (CoS) value for incoming untagged frames. Values

are 0-7 or <profile> if the port is profiled. The default CoS is 0.

Type Displays the limit on the size of the LAG. The type values include

Standard, where the LAG is limited to 16 ports, and Brocade LAG, where

the LAG is limited to 8 ports. The default is Standard.

MTU The maximum transmission unit (MTU). Valid values are from 1522

through 9216 bytes, and the default is 2500 bytes.

Mode Displays how the ports are added to the LAG members table in either

Static or Dynamic mode. The default is Dynamic, Active, but LAG

members can be Active or Passive if the LAG member is Dynamic.

Minimum Links Displays the minimum number of operationally UP links needed to

declare the port channel UP. This field is applicable only for standalone

Network OS devices.

LAG Members list Lists the ports that are members of the LAG.

TABLE 75 QoS (DCB) parameters on the Network OS switch LAG.

Field/Component Description

Mode The QoS mode (DCB).

Fabric Remap Priority The fabric remap priority of the LAG. Valid values are CoS 0 through CoS

6, and the default is CoS 0.

DCB Map The DCB map that is associated with the FCoE Map. This is a read-only

field.

Lossless Remap Priority The FCoE lossless remap priority of the LAG. Valid values are CoS 0

through CoS 6, and the default is CoS 0.

TABLE 74 LAG parameters on the Network OS switch LAG (Continued)

Field/Component Description