User Manual v12.3.0 Owner's manual

684 Brocade Network Advisor IP User Manual
53-1003153-01
Layer 2 access control list management
19
Assigning a Layer 2 ACL configuration to an interface (IronWare)
NOTE
You cannot modify or delete a Layer 2 ACL that is bound to a port.
To assign a Layer 2 ACL configuration to an interface, complete the following steps.
1. Select Configure > Security > Layer 2 ACL > Port.
The Port Selection - Layer 2 ACL dialog box displays.
FIGURE 266 Port Selection - Layer 2 ACL dialog box
2. Select a port in the Available Ports list and click the right arrow button.
3. Click OK.
The Device_Name - Port_Number - Layer 2 ACL Configuration dialog box displays.