User Manual v12.3.0 Owner's manual

Brocade Network Advisor IP User Manual 721

53-1003153-01

Layer 3 access control list policy

14. Click OK on the Advanced Settings dialog box.

To finish configuring the ACL, return to one of the following procedures:

• “Creating an extended L3 ACL configuration” on page 704

• “Editing an extended L3 ACL configuration” on page 706

• “Copying an extended L3 ACL configuration” on page 707

• “Creating an IPv6 L3 ACL configuration” on page 709

• “Editing an IPv6 L3 ACL configuration” on page 711

• “Copying an IPv6 L3 ACL configuration” on page 712

Network configuration

The Management application allows you to filter traffic from a specific Network. A Network is made

up of one or more devices in a subnet. Use the following procedures to configure a network:

• “Viewing existing networks” on page 721

• “Creating a network” on page 722

• “Editing a network” on page 723

• “Copying a network” on page 724

• “Deleting a network” on page 724

Viewing existing networks

You can access the Network dialog box when configuring a standard or extended L3 ACL device

configuration. To configure a standard or extended L3 ACL, refer to one of the following procedures:

• “Creating a standard L3 ACL configuration” on page 700

• “Editing a standard L3 ACL configuration” on page 702

• “Copying a standard L3 ACL configuration” on page 703

• “Creating an extended L3 ACL configuration” on page 704

• “Editing an extended L3 ACL configuration” on page 706

• “Copying an extended L3 ACL configuration” on page 707

To view all existing networks, complete the following steps.