User Manual v12.3.0 Owner's manual

Brocade Network Advisor IP User Manual 733
53-1003153-01
Layer 3 access control list policy
19
Editing a service
You can access the Service dialog box when configuring an extended L3 ACL device configuration.
To configure an extended L3 ACL, refer to one of the following procedures:
• “Creating an extended L3 ACL configuration” on page 704
• “Editing an extended L3 ACL configuration” on page 706
• “Copying an extended L3 ACL configuration” on page 707
• “Creating an extended L3 ACL configuration” on page 704
• “Editing an IPv6 L3 ACL configuration” on page 711
• “Copying an IPv6 L3 ACL configuration” on page 712
To edit a service, complete the following steps.
1. Click the Services tab.
2. Select the service you want to edit and click Edit.
The Edit Service dialog box displays.
3. Select one of the following protocol options:
• TCP
• UDP
4. Enter a port number in the Port field.
5. Click OK on the Edit Service dialog box.
6. Click Close on the Service dialog box.
To finish configuring the advanced settings for the ACL, refer to “Configuring L3 ACL advanced
settings” on page 717.
Copying a service
You can access the Service dialog box when configuring an extended L3 ACL device configuration.
To configure an extended L3 ACL, refer to one of the following procedures:
• “Creating an extended L3 ACL configuration” on page 704
• “Editing an extended L3 ACL configuration” on page 706
• “Copying an extended L3 ACL configuration” on page 707
• “Creating an extended L3 ACL configuration” on page 704
• “Editing an IPv6 L3 ACL configuration” on page 711
• “Copying an IPv6 L3 ACL configuration” on page 712
To copy a service, complete the following steps.
1. Click the Services tab.
2. Select the service you want to copy and click Duplicate.
The Duplicate Service dialog box displays.
3. Enter a name for the service in the Name field.