User Manual v12.3.0 Owner's manual

Brocade Network Advisor IP User Manual 823
53-1003153-01
Saving or copying Allow/Prohibit Matrix configurations to another device
22
6. Select the check box for the switch to which you want to save the configuration in the Selected
Switch list.
7. Cl ic k OK.
A message displays stating that the outstanding port configuration is discarded when copying
a configuration from the switch with more ports to a switch with fewer ports and vice versa.
Click OK to close the message.
The copied configuration displays in the Available Switches list under the selected switch. To
edit this configuration, refer to “Configuring an Allow/Prohibit Matrix” on page 819 or
“Configuring an Allow/Prohibit Matrix manually” on page 820.
Saving an Allow/Prohibit Matrix configuration to another
device
To save an existing Allow/Prohibit Matrix configuration to another device, complete the following
steps.
1. Select Configure > Allow/Prohibit Matrix.
The Configure Allow/Prohibit Matrix dialog box displays.
2. Select the Allow/Prohibit Matrix configuration you want to save.
You can do this by expanding the view for the switch under Available Switches and selecting a
configuration, or you can select the matrix under Allow/Prohibit Matrix.
3. Click Save As.
The Save As/Duplicate dialog box displays, as shown in Figure 318 on page 823.
FIGURE 318 Save As/Duplicate dialog box
4. Enter a name for the configuration.
5. Enter a description for the configuration.
6. Select the check box for the device to which you want to save the configuration in the Selected
Switch list.
7. Cl ic k OK.