User Manual v12.3.0 Owner's manual

880 Brocade Network Advisor IP User Manual
53-1003153-01
Change tracking
24
SFLO-1003 LOG Indicates that the global sFlow sampling rate has been changed to the
specified value.
SFLO-1004 LOG Indicates that the global sFlow counter sampling interval has been changed to
the specified value.
SFLO-1005 LOG Indicates that the sFlow sampling rate has been changed on the specified
port.
SFLO-1006 LOG Indicates that the sFlow polling interval has been changed on the specified
port.
SFLO-1007 LOG Indicates that the specified sFlow collector is either configured or not
configured.
SFLO-1010 LOG Indicates that the specified sFlow profile has been created.
SFLO-1011 LOG Indicates that the specified sFlow profile has been deleted.
SFLO-1012 LOG Indicates that the sampling rate has been updated for the specified sFlow
profile.
SNMP-1005 AUDIT | LOG SNMP configuration changed.
SNMP-1006 AUDIT | LOG Indicates that the specified SNMP configuration group was reset to the factory
default.
SSMD-1400 LOG Indicates that the specified access list has been created.
SSMD-1401 LOG Indicates that the specified access list type and name has been recorded as a
reference for ACL binding in the future.
SSMD-1402 LOG Indicates that the specified access list has been deleted.
SSMD-1403 LOG Indicates that the access list name and type recorded for bind forward
reference has been deleted.
SSMD-1404 LOG Indicates that the access list rules are added to or removed from an existing
policy.
SSMD-1406 LOG Indicates that the specified access list has been removed from the interface.
SSMD-1407 LOG Indicates that the specified access list has been configured on the interface.
SSMD-1408 LOG Indicates that the specified rules are added to the access control list (ACL).
SSMD-1750 LOG Indicates that the specified route map has been applied to the specified
interface.
SSMD-1752 LOG Indicates that the specified route map has been removed from the specified
interface.
SSMD-1900 LOG Indicates that a security sub-profile has been created for the specified
port-profile.
SSMD-1901 LOG Indicates that the specified access control list (ACL) has been configured for
the security sub-profile.
SSMD-1902 LOG Indicates that the specified access control list (ACL) has been removed from
the security sub-profile.
SSMD-1915 LOG Indicates that the security sub-profile has been deleted.
SULB-1103 AUDIT | LOG Indicates that firmware download has completed successfully on the
specified slot or partition.
SULB-1114 AUDIT | LOG Indicates that firmware upgrade has completed.
TABLE 86 Configuration change events for Adaptive backup (Continued)
Message ID Type Description