User Manual v12.3.0 Owner's manual

882 Brocade Network Advisor IP User Manual

53-1003153-01

Configuration snapshots

The Configuration File Manager dialog box - Configuration Snapshots tab, allows you to compare

two configuration snapshots; for example, the pre-configuration and post-configuration snapshots.

1. Click the IP tab.

2. Select Configure > Configuration File > Configuration File Manager.

3. Click the Configuration Snapshots tab.

The Configuration Snapshots tab displays, as shown in Figure 350.

FIGURE 350 Configuration File Manager dialog box - Configuration Snapshots tab

The Configuration Snapshots tab displays the following information:

• Product Name — The name of the product

• Product Snapshots — The product snapshots

• Date — The date when the snapshot file was stored in the server

• Snapshot Type — The type of snapshot generated. There are three types:

 Manual: Generated manually by clicking the Save Snapshot button on the Backup

Configuration Manager.

 Pre-Snapshot: Generated before the new configuration was deployed to the device.

 Post-Snapshot: Generated after the new configuration was deployed to the device.

ZONE-1042 LOG The effective configuration has been disabled.

ZONE-1043 LOG The Default Zone access mode is set to No Access.

TABLE 86 Configuration change events for Adaptive backup (Continued)

Message ID Type Description