User Manual v12.3.0 Owner's manual

890 Brocade Network Advisor IP User Manual
53-1003153-01
Schedule backup
24
NOTE
The Management application enables you to save the same switch configuration to the repository
using two methods: on demand (Configure > Configuration File > Save), on defining a schedule
(Configuration File> Schedule Backup), or by defining the adaptive backup support (Resync or
Adaptive).
To schedule a configuration backup, complete the following steps.
1. Click the IP tab.
2. Select Configure > Configuration File > Schedule Backup.
The Schedule Backup dialog box displays.
FIGURE 355 Schedule Backup dialog box
3. Select a backup configuration from the Backup Scheduler list.
4. Click the Edit button.
The Edit Automatic Configuration Backup dialog box displays, as shown in Figure 356.
FIGURE 356 Edit Automatic Configuration Backup dialog box
5. Enter the following information:
• Frequency - The interval at which scheduled tasks are to run. The following schedule types
are available:
• One Time
• Hourly
• Daily
• Weekly
• Monthly
• Yearly
• Time (hh:mm) - The time of day to run the backup. Options include hour, minute, and AM or
PM.
• Minutes past the hour - For hourly backups, select the number of minutes past the hour
from the list.