User Manual v12.1.0 Instruction Manual

Brocade Network Advisor SAN + IP User Manual 1461
53-1002949-01
SAN performance overview
43
• Tx MB/Sec — Available for FC, GE, managed HBA ports, managed CNA ports, 10GE ports,
E_port trunks, FCIP tunnels, and end-to-end monitors.
• Rx MB/Sec — Available for FC, GE, managed HBA ports, managed CNA ports, 10GE ports,
E_port trunks, FCIP tunnels, and end-to-end monitors.
• CRC Errors — Available for FC, managed HBA ports, managed CNA ports, 10GE ports and
end-to-end monitors.
• Signal Losses — Available for managed HBA ports, managed CNA ports, and FC ports.
• Sync Losses — Available for managed HBA ports, managed CNA ports, and FC ports.
• Link Failures — Available for managed HBA ports, managed CNA ports, and FC ports.
• Sequence Errors — Available for FC ports.
• Invalid Transmissions — Available for FC ports.
• Rx Link Resets — Available for FC ports.
• Tx Link Resets — Available for FC ports.
• C3 Discard — Available for FC ports.
• C3 Discard RX Timeout — Available for FC ports
• C3 Discard Tx Timeout — Available for FC ports
• C3 Discard Unreachable — Available for FC ports.
• C3 Discard Others — Available for FC ports.
• Encode Error out — Available for FC ports.
• Dropped Packets — Available for FCIP tunnels only.
• Compression Ratio — Available for FCIP tunnels only.
• Latency — Available for FCIP tunnels only.
• Link Retransmits — Available for FCIP tunnels only.
• Timeout Retransmits — Available for FCIP tunnels only.
• Fast Retransmits — Available for FCIP tunnels only.
• Duplicate Ack Received — Available for FCIP tunnels only.
• Window Size RTT — Available for FCIP tunnels only.
• TCP Out of Order Segments — Available for FCIP tunnels only.
• Slow Start Status — Available for FCIP tunnels only.
• Uncompressed Tx/Rx MB/sec - Available for FCIP tunnels only.
• Overflow Errors — Available for 10GE ports only.
• Runtime Errors — Available for 10GE ports only.
• Receive EOF — Available for 10GE ports only.
• Too Long Errors — Available for 10GE ports only.
• Underflow Errors — Available for 10GE ports only.
• Alignment Errors — Available for 10GE ports only.
• NOS Count — Available for managed HBA ports and managed CNA ports.
• Error Frames — Available for managed HBA ports and managed CNA ports.
• Under Sized Frames — Available for managed HBA ports and managed CNA ports.
• Over Sized Frames — Available for managed HBA ports and managed CNA ports.