User Manual v12.1.0 Instruction Manual

1518 Brocade Network Advisor SAN + IP User Manual

53-1002949-01

IP historical performance monitoring

• Threshold and Rearm settings - Threshold and Rearm page

You cannot modify the following attributes:

• Name - Collector Basics page

• Device or port level - Collector Basics page

• Polling interval - Collector Basics page

• Schedule setting - Collector Basics page

• MIB selection - MIB Object page

• Expression selection - Expression page

• MIB index - MIB Index page

NOTE

The MIB index page for system collectors will not show since you cannot configure the MIB

index for system collectors.

Displaying historical data collectors

Select Monitor > Performance > Historical Data Collectors to display configured historical data

collectors.

FIGURE 655 Historical Data Collectors dialog box

All configured data collectors are listed, showing the following information:

• Name - The name of the data collector.

• Enabled - Whether or not the data collector is enabled (Yes) or disabled (No).

• Polling Interval - The time interval, in minutes, between attempts to contact the information

source and gather data.

• Collectibles Type - At what level the data will be collected and the types of MIB objects used:

- Product Level - SNMP data is collected at the product (device) level.

- Port Level - SNMP data is collected at the port level.