User Manual v12.1.0 Instruction Manual

1616 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Accessing Flow Vision from other management application features
44
Bottleneck Detection
Select a port from the Bottlenecks dialog box and select Add Flow to launch the Add Flow Definition
dialog box. The Add Flow Definition dialog box will be populated with the following information when
available:
• Source Device - *
• Destination Device - *
• Ingress port - Transmit port
• Monitor - Bidirectional
Table 159 describes how options on the Add Flow Definition dialog box are populated according to
the port selected on the Bottlenecks dialog box.
NOTE
Entering * uses all values available devices from the ellipses button on the right of the Source
Device and Destination Device field.
For more information on using Bottleneck Detection, refer to “Bottleneck detection” on page 1488.
TABLE 159 Add Flow Definition dialog box options populated per Bottlenecks selection
Port Selected Options populated
E_Port Source Device = * if port is on a 16-Gbps-capable switch, otherwise empty.
Destination Device = * if port is on a 16-Gbps switch, otherwise empty.
Ingress Port = selected Port Number
Target Switch = Selected switch
Initiator Source Device = Initiator port ID.
Destination Device = * if port is on a 16-Gbps switch, otherwise empty.
Ingress Port = Selected port’s connected switch port number.
Target Switch = Selected port’s connected switch
Target Source Device = * if port is on a 16-Gbps switch, otherwise empty.
Destination Device = Target port ID.
Ingress Port = Selected port’s connected switch port number.
Target Switch = Selected port’s connected switch
If port other than
E_Port, initiator,
or target port
selected
Source Device = * if port is on a 16-Gbps switch, otherwise empty.
Destination Device = * if port is on a 16-Gbps switch, otherwise empty.
Ingress Port = Selected switch port number.
Target Switch = Selected switch