User Manual v12.1.0 Instruction Manual

1642 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Schedule PoE power deployment
46
FIGURE 716 Schedule PoE On/Off dialog box
4. (Ports only) Select a port from the Port list.
5. Enter a name for the schedule in the Schedule Name field.
6. Enter a description for the schedule in the Description field.
7. Select the Enable check box to enable the schedule.
8. Select the PoE On option to enable PoE.
9. Choose one of the following options to configure the frequency at which deployment runs for
the schedule:
• To configure deployment to run only once, refer to “Configuring a one-time deployment
schedule” on page 1643.
• To configure hourly deployment, refer to “Configuring an hourly deployment schedule” on
page 1643.
• To configure daily deployment, refer to “Configuring a daily deployment schedule” on
page 1644.
• To configure weekly deployment, refer to “Configuring a weekly deployment schedule” on
page 1644.
• To configure monthly deployment, refer to “Configuring a monthly deployment schedule”
on page 1645.
• To configure yearly deployment, refer to “Configuring a yearly deployment schedule” on
page 1645.
10. Click Add.
11. Click Close to close the Schedule PoE On/Off dialog box.
12. Click Close to close the Power Center dialog box.