User Manual v12.1.0 Instruction Manual

Brocade Network Advisor SAN + IP User Manual 1793
53-1002949-01
MAPS category, object, and measure hierarchy
50
Security
Health
Local Switch • SEC_DCC — Device connection control violations
• SEC_HTTP — HTTP violations
• SEC_CMD — Illegal command
• SEC_IDB — Incompatible security DB
• SEC_LV — Login violations
• SEC_CERT — Invalid certifications
• SEC_FCS — No Fabric Configuration Server (FCS) switch
• SEC_SCC — Switch Connection Control violations
• SEC_AUTH_FAIL: — Authentication failures
• SEC_TELNET — Telnet violations
• SEC_TS — Time server out of synchronization
• RAS Log Event
• SNMP Trap
• E-mail
Switch
Resources
Temperature sensor
• TEMP — Temperature • RAS Log Event
• SNMP Trap
• E-mail
Local Chassis
• FLASH_USAGE
2
— Flash usage
• CPU — CPU usage
• MEMORY_USAGE — Memory usage
• RAS Log Event
• SNMP Trap
• E-mail
FCIP Circuit
• CIR_STATE — FCIP circuit state changes
• CIR_UTIL — FCIP circuit utilization
• CIR_PKTLOSS — FCIP packet loss
• RAS Log Event
• Fence (CIR_STATE)
• SNMP Trap
• E-mail
Traffic /
Flows
Performance
FC Port
• RX — Receive bandwidth usage percentage
• TX — Transmit bandwidth usage percentage
• UTIL — Trunk utilization
• RAS Log Event
• SNMP Trap
• E-mail
Flow
• TX_FCNT — Tx Frame Count
• RX_FCNT — Rx Frame Count
• TX_THPUT — Tx Throughput
• CRED_ZERO — Time Tx credit zero
• RX_THPUT — Rx Throughput
• IO_RD — IO Read Command Count
• IO_WR — IO Write Command Count
• IO_RD_BYTES — IO Read Data
• IO_WR_BYTES — IO Write Data
1. Only valid for 16 Gbps, 10 Gbps, and QSFP transceivers.
2. For FLASH_USAGE, you can configure RAS Log Event, Fence, SNMP Trap, E-mail, Switch Status Critical, or Switch Status Marginal.
TABLE 173 Monitors and actions by category (Continued)
Category Objects Measures Possible actions