User Manual v12.1.0 Instruction Manual

1824 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
MAPS groups
50
FIGURE 777 Fabric/Device_Name - Manage MAPS Groups dialog box
3. Review the group details:
Sort the contents by clicking the column header (Name or Type). Click the same column header
again to reverse the sort order.
• Groups list — List of groups available on the selected fabric or device.
 Name — Group name
 Type — Group type (Port, SFP, or Circuit)
• Available Ports/Circuits list — List of available ports, SFPs, or circuits and the associated
products for the selected group.
 Group/Product — Available devices and ports
 Name — Device name, port name, or circuit name
 IP Address — IP address of the device
 Product Type — Product type (such as switch or blade)
• Left and right arrow buttons — Click to move ports, SFPs, or circuits between the Selected
Ports/Circuits list and Selected Ports/Circuits list.
• Selected Ports/Circuits list — List of selected ports, SFPs, or circuits and the associated
products for the selected group.
 Group/Product — Selected devices and ports
 Name — Device name, port name, or circuit name
 IP Address — IP address of the device
 Product Type — Product type (such as switch or blade)
• Add button — Click to add a group to the Groups list. To create one or more groups on the
selected device or fabric, refer to “Creating multiple groups” on page 1825.
• Delete button — Click to delete the selected group from the Groups list (“Deleting a group”
on page 1826).
4. Click OK on the Fabric/Device _Name - Manage MAPS Groups dialog box.
5. Click Close on the MAPS Configuration dialog box.