User Manual v12.1.0 Instruction Manual

Brocade Network Advisor SAN + IP User Manual 499
53-1002949-01
AAA Settings tab
13
FIGURE 184 AAA Settings tab - TACACS+ server
3. Add or edit a TACACS+ server by referring to “Configuring a TACACS+ server” on page 500.
4. Rearrange the TACACS+ servers in the table by selecting a server and click the Up or Down
button to move it.
5. Delete a TACACS+ server by selecting the server and click Delete.
6. Test the established active connection with the TACACS+ server by clicking Test.
The Test Authentication dialog box displays.
7. Enter your user ID and password and click Test.
Test verifies your user ID and password for the local database and verifies user privileges on
the Management application server.
8. Set secondary authentication by selecting one of the following options from the Secondary
Authentication list:
• Local Database
• None
9. Set the fall back condition to secondary authentication by selecting one of the following
options from the Fail Over Option list:
• TACACS+ Server Not Reachable
• TACACS+ Server Authentication Failed
10. Set the authorization preference by selecting one of the following options from the
Authorization Preference list:
• Local Database
• Primary Authentication Server
11. Click Apply to save the configuration.
To display the authentication audit trail, refer to “Displaying the client authentication audit
trail” on page 505.
12. Click Close to close the Server Management Console.