User Manual v12.1.0 Instruction Manual

784 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Layer 3 access control list policy
22
9. Click OK on the Edit - L3 ACL (IPv 6) Configuration dialog box.
The updated ACL displays in the ACLs list.
10. To set the configuration type and operations, refer to “Configuring the ACL configuration type
and operations” on page 788.
11. (Ethernet routers only) To set the hit statistics duration, refer to “Configuring hit statistics” on
page 788.
12. To deploy the configuration, click OK on the Device_Name - L3 ACL Configuration dialog box.
The Deploy to Products - L3 ACL dialog box displays. To deploy the configuration, refer to
“Security configuration deployment” on page 819.
Copying an IPv6 L3 ACL configuration
To copy an IPv6 L3 ACL configuration, complete the following steps.
1. Select an Ethernet router product and select Configure > Security > L3 ACL > Product.
The Device_Name - L3 ACL Configuration dialog box displays.
2. Select the ACL configuration you want to copy in the ACLs list and click Duplicate.
The Duplicate - L3 ACL (IPv6 ) Configuration dialog box displays with the default name ‘Copy of
Original_Name’.
FIGURE 278 Duplicate - L3 ACL (IPv6) Configuration dialog box
3. Edit the name or number for the ACL in the ACL Name/Number field.
4. To add a new ACL entry, repeat step 4 through step 11 in “Creating an extended L3 ACL
configuration” on page 777.
5. To edit an existing ACL entry, select the ACL you want to edit in the ACL Entries list, click the
right arrow button and repeat step 4 through step 11 in “Creating an extended L3 ACL
configuration” on page 777.