User Manual v12.3.0 Owner manual

Brocade Network Advisor SAN + IP User Manual 1041
53-1003155-01
Steps for connecting to a KMIP-compliant SafeNet KeySecure
25
Configuring the KMIP server
1. From the KeySecure Management Console, select the Device tab, then select Device
Configuration > Key Server > Key Server.
The Cryptographic Key Server Configuration page displays. (Refer to Figure 418.)
FIGURE 418 KeySecure Cryptographic Key Server Configuration page
2. Under Cryptographic Key Server Settings, select KMIP as the protocol.
3. Ensure that the Use SSL check box is selected.
4. Click Edit to open a dialog box for changing IP, Port, and Server Certificate settings.
5. After changing/adding your settings, save your settings.
You are returned to the Cryptographic Key Server Configuration page. The settings are
displayed in the table.