User Manual v12.3.0 Owner manual

1100 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Configuring encryption storage targets
25
FIGURE 484 Configuration Status screen
The screen contains the following information:
• Device: The device type (target or host).
• Device Port WWN: The port world wide name.
• Represented by VI/VT: The virtual target (VT) mapped to the physical target or virtual
initiator (VI) representing the host.
• VI/VT Port WWN: The port world wide name of the virtual target or virtual initiator.
• VI/VT Node WWN: The node world wide name of the virtual target or virtual initiator.
13. Review any post-configuration instructions or messages, which you can copy to a clipboard or
print for later, then click Next.
The Next Steps screen displays. (Refer to Figure 485.) Post-configuration instructions for
installing public key certificates for the encryption switch are displayed. These instructions are
specific to the key vault type.