User Manual v12.3.0 Owner manual

1664 Brocade Network Advisor SAN + IP User Manual

53-1003155-01

IP historical performance monitoring

• Name - Collector Basics page

• Device or port level - Collector Basics page

• Polling interval - Collector Basics page

• Schedule setting - Collector Basics page

• MIB selection - MIB Object page

• Expression selection - Expression page

• MIB index - MIB Index page

NOTE

The MIB Index page for system collectors will not show because you cannot configure the MIB

index for system collectors.

Displaying historical data collectors

Select Monitor > Performance > Historical Data Collectors to display configured historical data

collectors.

FIGURE 748 Historical Data Collectors dialog box

All configured data collectors are listed, showing the following information:

• Name - The name of the data collector.

• Enabled - Whether or not the data collector is enabled (Yes) or disabled (No).

NOTE

The Netiron Ether Stats Collector and NOS Ethernet Port Optics Collector will be disabled by default.

• Polling Interval - The time interval, in minutes, between attempts to contact the information

source and gather data.

NOTE

The Polling Interval for NOS ethernet port optics collector is 30 minutes.