User Manual v12.3.0 Owner manual

Brocade Network Advisor SAN + IP User Manual 1725

53-1003155-01

Chapter

Flow Vision

In this chapter

•Flow Vision overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1725

•Flow Vision features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1727

•Flow Vision flows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1727

•Flow Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1737

•Flow Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1776

•Flow Mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1788

•Predefined flow definition templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1802

•Flow Vision interoperability with other features . . . . . . . . . . . . . . . . . . . 1811

Flow Vision overview

Flow Vision is a Fibre Channel (FC) SAN network diagnostic tool supported on all platforms

supported by Fabric OS 7.2 and later that provides you with a comprehensive vision of fabric traffic

flows and with the ability to non-disruptively create and capture copies of traffic flows for later

analysis. Flow Vision also provides a test flow generation capability that you can use to pre-test a

SAN infrastructure for robustness. This test flow generation capability is also useful for testing the

internal connections on a switch before deploying the switch into a production environment.

NOTE

You cannot run Flow Vision and Advanced Performance Monitor (APM) or Port Mirroring at the same

time on a chassis (across logical switches).

Supported hardware platforms

Flow Vision is supported on Fabric OS platforms using 8 Gbps- and 16 Gbps-capable FC platforms;

there are no platform exclusions. For a list of port types that support Flow Vision, refer to

“Supported port types” on page 1726".

Flow Vision requires the Fabric Vision (FV) license or both the Fabric Watch (FW) and the Advanced

Performance Monitor (APM) licenses must be installed on the hardware platform. For more

information about Fabric OS licenses, refer to the Brocade Network Advisor Software Licensing

Guide.

For details on Flow Vision feature and parameter support on switch platforms, Access Gateway

switches, and virtual fabrics, refer to “Supported port configurations for each feature” on

page 1730".