User Manual v12.3.0 Owner manual

1726 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Flow Vision overview
44
Supported port types
Flow Vision is supported on the following 8 Gbps- or 16 Gbps-capable FC port types. For more
information on support for a specific feature, such as Flow Monitor, Flow Mirror, or Flow Generator,
refer to the appropriate sections on those features.
• E_Ports
• F_Ports
• EX_Ports
• E_Port trunk
• F_Port trunk
• M_Ports (Mirror ports)
• SIM-Ports
• Base E-port
Flow Vision terminology
Table 148 explains the terms used in the discussion of Flow Vision.
TABLE 148 Flow Vision terminology
Term Description
Defined flow User-created flow; it can be active or inactive.
Local flow Flow defined on the switch on which you run the flow.
Root flow Instance of a static flow used to create learned flows.
Static flow Flow created without using a learned flow.
Sub-flow System auto-created flow based on a root flow. There can be more than one sub-flow.
Remote flow Flow defined on a different switch from the one on which you are viewing it.
Learned flow Flow defined using an asterisk (*) for the source and destination end devices, which
enables Flow Vision to learn all of the source and destination device pairs passing
through the switch through a specified ingress or egress port without having to identify
all the devices.
Local switch Switch on which you run the flow.
Remote switch Switch other than the switch on which you run the flow.
ISL An Inter-Switch Link (ISL) is a protocol that maintains VLAN information in Ethernet
frames as traffic flows between switches and routers, or switches and switches.
DISL A Dynamic ISL (DISL) is a physically-connected link between two logical switches that
belong to the same Fabric ID (FID). A DISL is dedicated to carry frames only related to
the FIDs of connected logical switches.
LISL A Logical ISL (LISL) is a logical link between two logical switches that is used for control
frames. Depending on the fabric topology, a LISL may or may not map directly to a
single physical ISL.
XISL An eXtended ISL (XISL) is a logical link connecting base switches together to form the
base fabric. It carries frames from the base fabric and other logical fabrics using the
encapsulation and inter-fabric link (IFL) header as identifiers.
Backbone E_Port The E_Port on a Fibre Channel Routing (FCR)-enabled switch.