User Manual v12.3.0 Owner manual

Brocade Network Advisor SAN + IP User Manual 1929
53-1003155-01
Syslogs
48
FIGURE 857 Syslog Forwarding dialog box
2. Select the Enable syslog forwarding check box.
3. Click Add.
The Add Syslog Destination dialog box, shown in Figure 858, displays. The Enable and Syslog
Repeater check boxes are selected by default.
FIGURE 858 Add Syslog Destination dialog box
4. Enter a general description of the syslog destination in the Description field.
5. Enter the IP address of the syslog destination in the IP Address field. This is a mandatory field.
IPv4 and IPv6 addresses are accepted, but a DNS name is not accepted.